Product Introduction

Product Name:Hand-held sealer

Features:3 Adjustable Gear & Quick Seal

Fully charged Sealing Times:300/200/100

USB Port:TYPE-C

Product Dimension:121*50.5*40mm

Heat Strip Length: 100MM/3.96”

Read Before The Use

1. Long press button for about 3s to turn on, the default gear is on lst.

2. One click button to switch gears from lst to 2nd, two click to 3rd gear, click again to turn off.

3. When the indicated light is on, the gear is working.

Applicable Bags

1st Gear for clear plastic bags.

2nd Gear for general bags,snack bags,chip bags,vacuum sealer bags,and cereal bags.

3rd Gear for relatively thick bags, mylar bags,and pet food bags.

Steps To Use

1. When using, first move the magnetic suction between the upper and lower shells to the bottom

2. According to the thickness of bag. Select gear (The product has three sealing gear:One light is in first gear, two light is in second gear, three light is in third gear)

3. Put the part of the bag that needs to be sealed into the sealed working area and put down the product Cover, press the top cover, when the light turns red, the seal works, when When the light turns blue, the bag is sealed and the lid can be loosened.You can repeat this procedure when you have more than one bag to seal.

4. After the heat seal is completed, move the magnetic magnet in the middle of the upper and lower covers to the top, so that the magnetic pair (merge)

5. When you need to use the blade, push out the blade and press the blade push button to use.When the push button is released, the blade automatically resets.

6. There is a magnetic sheet at the bottom of the product, which can be attached to the refrigerator.

7. When the battery is low, the red light blinks and needs to be charged. charging When, the indicator is red, and when fully charged, the indicator is off.5 minutes without use will turn itself off.

Notice

1.Avoid putting the product into direct sunlight for a long time & the rain sprinkle position

2. Place out of reach of children and pets.

3.Product built-in precision device ,the drop may cause damage.

4. Please fully charged it before storing it, and storage in a moderate temp and dry room.

5. Before re-use, check if the product is intact, if the magnet fallsoff please stick it with a strong adhesive, and fully charge it.